- 16 -
ADJUSTMENT INSTRUCTIONS
10-2. It followed in Screen Form,
Adjustment Method
(1) When the screen is rotated: Rotate the Engine to adjust
1) Badness Type: Tilt Badness
2) Adjustment Method:
Engine Base rotate with the left/right and fix the
horizontality horizontal line of Cross Pattern
(2) In case of the upper screen size is large bottom screen
size than: upward projector
1) Badness Type: Keystone Badness
2) Adjustment Method:
The Engine Base front part raises at upper direction and
projection lens to be downward projector.
Bottom screen size a lot, fix the top/bottom screen size to
be same as.
(2) In case of the upper screen size is smaller bottom screen
size than: downward projector
1) Badness Type: Keystone Badness
2) Adjustment Method:
The Engine Base front part down at bottom direction
and projection lens to be upward projector.
Top screen size a lot, fix the top/bottom screen size to
be same as.
11. Screen Position Adjustment
(Base value --> H: 384, V: 168)
11-1. Required Test Equipment
Service Remote Control
11-2. Horizontal Position Adjustment
(1) Press ADJ key on the remote control to enter the
adjustment mode.
(2) Select POSITION in the adjustment menu.
(3) AThe adjustment pattern below appears.
(4) Select H_position with CHANNEL key.
(5) Change data with using the VOLUME keys on the remote
control in order adjust left/right screen semmetry
(6) If symptom is out of adjustable range: N.G.
11-3. Vertical Position Adjustment
(1) Select V_position with CHANNEL key.
(2) Change data with using the VOLUME key on the remote
control in order to adjust up/downscreen semmetry
(3) If symptom is out of adjustable range: N.G.
Содержание RU-44SZ63D
