![background image](http://html.mh-extra.com/html/lg/ru-44sz63d/ru-44sz63d_service-manual_217922015.webp)
- 15 -
ADJUSTMENT INSTRUCTIONS
9. CPLD Download Work
9-1. Required Test Equipments &
Preparation for Adjustment
(1) Connect the PC and memory JIG as shown in <Fig. 10>.
(2) Turn on JIG MAIN POWER SW.
(3) After turning on the PC and moniter, operate the device
programming software.
9-2. Adjustment Sequence
(1) Once the program is running, [OPTION MODE
SELECTION] is displayed in the window.
Check the “Load configuration File(.cdf, .pdr)” in this window
and click the finish button
(2) When the screen displays the open window, select the
suitable file(*.cdf) according to model.
(3) IC figure is change to green by clicking it.
(Refer to <Fig. 11>)
(4) Select program options.
(5) Check the [Erase before programming] and [Verify] menu
as shown <Fig. 12> and press the OK button.
(6) At this time, the download starts. The download will finish
in about 10 seconds.
10. Tilt & Keystone Adjustment
(Apply the HD3(DLP) Engine)
10-1. It followed in Screen Condition,
Projector Lens Direction
(1) When the upper portion of the screen is larger than the
bottom: Adjust Projection lens upward.
(2) When the upper portion of the screen is smaller than the
bottom: Adjust Projection lens downward.
3.3V
<Fig. 10 > How to connect the MEMORY JIG and PC>
<Fig. 11>
<Fig . 12>
Содержание RU-44SZ63D
