1 6
Part 5
PROGRAMMING MODE -
Setup Mode
Setup Mode : (display)
You can change dryer vend price, cycle time, and cycle parameters, etc.
Entering set up mode
• Coin type - Turn on/off toggle switch.
• Card type - Insert the service card.
• Stack type - Take off control panel, and turn on/off toggle switch.
• OPL type – Push “WHITES&COLORS” + “DELICATES” and the ‘3’.
• Then, dryer displays .
Entering set up mode.
You will see LqC1
Press the
WHITES & COLORS
button.
Press the
PERM. PRESS
or the
DELICATES
button until appears in the display.
Press the
START
button.
Press the
START
button.
Display previous regular price.
Press
PERM. PRESS(+)
or
DELICATES(-)
button to set
regular price.
(The vend price can be set from 0 to 10.00 in 1$ increments.)
Press the
START
button.
The machine sets up the regular price, then advances to the
next process automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• Stack type - 1. Control panel open.
2. Turn on/off toggle switch.
11
How to change regular price.
Button
Display
Note
• rgCP (regular cold price) is not available in dryer.
• rgrP (regular warm price) is not available in dryer.
• rgHP (regular hot price) is not available in dryer.
