1 3
Part 5
PROGRAMMING MODE
- Card Type
1) Insert service card.
2) Display will show
- Coin Type
1) Dissemble upper coin box key.
2) Take out the coin drop from the coin box.
3) Turn on/off the toggle switch at the back of the
coin box.
4) Display will show “ ”.
- OPL Type
1) Push the WHITES & DELICATES and
DELICATES button at the same time.
2) Push the PERM.PRESS button 3 times.
3) Push the START button.
4) Display will show “ ”
Press button
WHITES &
COLORS
PERM.
PRESS
DELICATES
NO HEAT
START
Description
Move to upper level
Move to the mode in the
same level (+)
Move to the modes in the
same level (-)
-
Enter the selected mode
Coin Vault
Coin Box Key
COIN TYPE
CARD TYPE
Insert debit card
OPL TYPE
• If you turn on the power without connecting the meter case for the first time, the machine will display .
• When the machine comes from the factory, it is set in the coin type. You can change Card/Coin type by button.
(For more information refer to SETUP mode’s .)
• The machine will display “PUSH” for OPL type
• Do not enter the "Vend type set up" mode if the machine is a coin type. You cannot restore it back to Coin type
without a special card reader and a service card after it has been changed to Card type in the set up mode.
Note
You can enter programming mode
only for Idle state and pause state.
How to enter "Programming mode"
You can change Dryer vend price, cycle time and
Cycle parameters, etc.
How to use button
You can check machine information or change setting on Program setup or Diagnostic test.
There are two methods that you can enter programming mode.
11
Programming mode
