1 2
Part 4
OPERATING YOUR DRYER
1) Coin / Card type
- The cycle LEDs flash at the same time, when the
price of cycles are equal.
2) OPL type
- The cycle LEDs is lit at the same time, and displayed
‘PUSH’.
11
Ready mode
Insert a cash card that has a sufficient balance.
The card balance should be more than the
programmed vend price for a selected cycle.
Insert a sufficient amount of change that is a more
than the programmed vend price for a selected
cycle.
2
2
Insert card/coin (not for OPL type)
Press the desired cycle and the start button. The
display LED will show the remaining time and the
selected cycle starts.
3
3
Select the cycle
You cannot change the cycle while the machine is
running.
But if the door is opened, the machine stops
temporarily and the cycle can be changed.
5
5
Change cycle
After the COOL DOWN of cycle, the machine
stops and LED display shows End.
If you press any key or open the door, the dryer
defaults to the ready mode.
6
6
Cycle finish
After a debit card is inserted, the operating
time can be increased to 15 minutes/$1.00
(default), when the START button or the
chosen course button has been pressed.
(The card should have enough balance to
satisfy increasing time.)
The operating time can be increased to 15
minutes/$1.00 (default) by adding more
coins.
When the COOL DOWN has been working, if
time is added, it goes back to the DRYING.
Time can be added up 99 minutes.
4
4
Top off (To add more time)
When the card balance is not enough, machine
displays the balance for 5 seconds and then
displays message repetitively
Note
When the coin amount is not enough, the
machine will not start.
Note
The last 2 minutes of the remaining time are
always for the cool down portion.
Note
Owner can control the additional time and
money setting (top off price).
Note
