manualshive.com logo in svg

LG PRCKD21E, Руководство по установке

Поделиться
Скачать
LG PRCKD21E Скачать руководство пользователя страница 18

18

CONTROL KIT INSTALLATION

ENGLISH

CONTROL KIT outdoor box
installation

Outdoor box installation location verification /
Punching holes

- Verify CONTROL KIT outdoor box installation

location in AHU product and punch the holes.

- Verify the location of the holes at the back of

Outdoor box and if there are installation ma-
terial

Outdoor box / CONTROL KIT installation

- Match the holes punched on the side of AHU

and the holes of outdoor box and fix them
with bolts and nuts (CONTROL KIT enclosed)
and washer(outdoor box enclosed).

- Fix CONTROL KOT inside the installed out-

door box. During the fixing, separate the nut
locked to the bolts inside outdoor box and fix
as follows.

- After completing the installation, verify if it is

composed as follows.

4-Ø12 hole

Nut (4EA)

Bolt (4EA)

Washer 

(4EA)

Washer (4EA)

Nut (4EA)

Control Kit

Washer 

(4EA)

Reduce the bracket 

gap and fix by 

tightening 

the nuts.

4 holes

<Outdoor box backside>

Product name Specification  Quantity(EA)

Location

Washer

M10, SUS

4

Outdoor box enclosed

Bolt

M10X 70, SUS

4

Control Kit 

enclosed

Nut

M10, SUS

4

Washer

M10, SUS

4

CAUTION

• Do not install the product by one per-

son.  It may cause injury.

• After installation of the product, check if

the bots and nuts are properly fixed.

• After installation of the product, adjust the

wire fixing bracket gap at the bottom of
outdoor box to block the wire penetration
space. (Rats, animal, etc. may enter and
damage the electric wires.)

• After installation of the product, verify

the sealed status of AHU and outdoor
box connection part. If there is a defect
in the seal, it may cause leakage.

• If AHU is installed outside, to protect

CONTROL KIT, make sure to install out-
door box.

!

Содержание PRCKD21E



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды