Owner's instruction
Owner’s & Installation Manual
43
ENGLISH
Owner's instruction
42
Wide Wired Remote Controller
Programming : Setting Simple Reservation
Press button to enter the
Programming mode.
(the segment flashing)
Ex) Setting Simple Reservation
time as '3'.
1
Press button to adjust
reservation time.
2
Press button to finish setting.
3
Adjusting the reservation time after finish
reservation setting will release the
previous one.
4
In case of there is not any reservation setup on system, it is possible to make a SIMPLE reservation
on indoor unit.
❊
If the indoor is ON, we can make the reservation for turning OFF. In reserve, if the indoor is OFF,
we can set the timer for turning ON. The reservation time is from 1 to 7 hours.
Press button to move to 'Minute'
setting mode. (the 'Minute' segment will
flash)
7
Setting Minute value by pressing
button.
8
Press button to finish.
9
In the process, press
button to release and exit
from setting mode.
(In case of exit with
incomplete information, it will
return to the previous setting )
10
