DRAIN PIPE ASSEMBLY and one connected to the
1) Using a short screwdriver, loosen one SCREW in
MOTOR COVER.
2) Pull and separate the FAN ASSEMBLY and MOTOR
turning counterclockwise based on the MOTOR SHAFT.
The assembly is in the reverse order of the disassembly
and take special care for the following details.
1. Be careful not to bend the tube during assembly.
2. Press the WATER DISPENSER button until water pours
out and check for leakage in the CONNECTOR TUBE (It
differs by the water pressure but usually takes about 2
minutes until water pours out.)
®
®
MOTOR COVER
FAN ASSEMBLY
MOTOR
- 15 -
3-19 FAN AND FAN MOTOR DISASSEMBLY
METHOD
3-20 PULL OUT DRAWER
To remove, lift basket up and pull out straight out.
2.
1.
To Install, pull both rails out to full extension.
Hook the basket supports into the rail tabs and push to
the back of compartment.
1
2
Содержание Panorama LFX21980ST
Страница 33: ...8 2 PCB FUNCTION 8 2 1 Power Circuit 1 Power is supplied to the control board at pin1 and 3 of connector 1 33 ...
Страница 40: ... 40 8 4 MAIN PWB ASSEMBLY AND PARTS LIST 8 4 1 Main PWB Assembly ...
Страница 41: ...8 4 2 Dispenser Drive PWB Assembly 41 ...
Страница 51: ...MARCH 2008 ...