ENGLISH
_inde
x
10
(For installation on wood stud)
Use the Ø 4 mm drill bit for wood to drill holes with the depth of
76 mm. (Clean the drilled hole.)
Drywall
Wood stud
76 mm
Without using the wall mounting anchor, fasten the wall mounting
screw directly to the wood stud.
After Installation
•
When connecting additional cables from the sides, we
recommend holding the centre of the TV horizontally or
vertically and pulling the product to make sure there is
sufficient distance from the wall before connecting.
•
When connecting additional cables from the bottom, we
recommend releasing the TV from the wall mount before
connecting.
•
Use cable management systems to arrange the
cables at the bottom of the TV as shown below. Cable
managements are not provided with the product, so
purchase them separately.
(For example)
•
After installing the product, be sure to use it adhered to
the wall.
-
Using the product while it is not adhered to the wall
may damage or shake the product.
Connections
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.
Antenna/Cable
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
•
Use a signal splitter to use more than 2 TVs.
•
If the image quality is poor, install a signal amplifier properly to
improve the image quality.
•
If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
•
An antenna cable and converter are not supplied.
•
For a location that is not supported with Ultra HD broadcasting, this
TV cannot receive Ultra HD broadcasts directly.
Satellite dish
Connect the TV to a satellite dish to a satellite socket with a satellite RF
cable (75 Ω). (Depending on model)
CI module
View the encrypted (pay) services in digital TV mode. (Depending on
model)
•
Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.
•
If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.
