LG Nortel GDC-400 Скачать руководство пользователя

Страница: 66 / 72

11. Troubleshooting Guide

Problem

Reason

Solution

LCD is empty.

No power

Check the battery then, press
the

POWER

button.

“

NO CHANNEL

” is displayed

when pressing

TALK

button.

No free channel

Wait until a free channel is
released.

Small Voice

Small voice level

While connected to a call,

Press

button.

Small Ring

Small ring volume level

Adjust Ring volume level;

Refer to ‘

HS Setting

’.

“

UNREGISTERED

” is displayed

on the LCD.

Not subscribed

Subscribe the terminal.

Refer to ‘9.2

Subscription’.

Low battery icon ( ) is flashing
on LCD with warning tone.

Low battery level

Recharge the battery.

Power-off right after power-on

Almost fully discharged
battery.

Recharge the battery.

No Base Lock State

Wait until Base Locked or move
to a place with good RSSI

No tone is heard when pressing
a digit.

Tone Volume is off.

Adjust Key tone level;

In an idle state

Refer to ‘

HS Setting

’

Unexpected call disconnect or
call failure

Bad radio Environment.

Radio environment is changed
unexpectedly even in the same
place. Move to another place
with good RSSI or wait until
RSSI is recovered.

Different battery duration from
the battery duration table

Bad charging habit or
kept the battery
inadequate place.

Charge and keep the battery
according to the suggested
ways.

Refer to ‘3.4 Charging the

handset’.

Subscript can’t be done.

1. There is

interference of
other systems with
subscription.

2. A station is too far

from the terminal.

3. Wrong PARK value

or (and) wrong AC
code.

4. There is no

available
wireless channel.

1. Remove other systems.
2. Be sure a base station is

close to the terminal.

3. Be sure PARK value and

AC code is correct.

4. Wait until available wireless

channel is free. If the
subscription

still fails, retry the power

reset.

RSSI : Radio Signal Strength Indication. Always a user can see RSSI icon while the terminal

is operating.

Содержание Nortel GDC-400









































































Результаты поиска

Содержание Nortel GDC-400

Отзывы:

Похожие инструкции для Nortel GDC-400

Бренды по названию

Популярные бренды

LG Nortel GDC-400, Руководство пользователя

Результаты поиска

Содержание Nortel GDC-400

Отзывы:

Похожие инструкции для Nortel GDC-400

Бренды по названию

Популярные бренды