LG NeroPdvd, Руководство пользователя

Страница: 9 / 15

6
To Install as a Slave Drive
To install the drive as a Slave, change the jumper setting on the rear panel to SL.
Connecting the Power Connector
Connect the power cable from the computer’s power supply to the socket on the drive unit, fitting
the connector firmly into the power in connector. If there is no spare power cable available in the
computer, you will have to purchase a splitter cable of a suitable type.
Connecting the Interface Connector
Connect the 40-pin IDE cable to the back of the Drive, making sure the coloured (red) stripe on
the IDE cable is connected to pin 1 on the drive. Pin 1 is closest to the Power Connector.
Slave drive
(CD/DVD drive)
(Jumper set to Slave)
Master drive
(Booting hard disk)
- OR -
DIGITAL ANALOG
INTERFACE
POWER
D R
C S M
S L A
G L G
39
1 +5 +12 GND
40
2
AUDIO
AUDIO
Primary
connector
Secondary
connector
Master drive
(Other IDE drive)
Slave drive
(CD/DVD
drive)
(Jumper set
to Slave)
DIGITAL ANALOG
INTERFACE
POWER
D R
C S M
S L A
G L G
39
1 +5 +12 GND
40
2
AUDIO
AUDIO
DIGITAL
ANALOG
INTERFACE
POWER
D R C S M
S L A G L G
39
1 +5
+12
GND
40
2
AUDIO
AUDIO
Master drive
(Booting hard disk)
NOTE : Improper connection may damage the
drive and void the warranty. Generally, the
power connector can only fit one way.
NOTE : Generally, the IDE connector is keyed
and will only fit one way.
Beveled edge up
Pin1
Red-edge