11
SuperSign Player
SuperSign Player
Server IP setting
In the
Server IP
setting you can set the IP of the PC (server) in which SuperSign Manager is installed.
It is set to
Auto Setting
by default.
Wizard Setting
SuperSign Solution now provides SuperSign Network Setup Wizard that guides you through the steps necessary
to configure network settings on your SuperSign Player and SuperSign Manager.
● With
Auto Setting
selected, the IP of the server using the
same network as the player will be automatically assigned.
● With
Manual Setting
selected, you can choose a specific
server IP.
● Click the
Save
button to save the settings.
Attention
● Before continuing with the wizard, please make sure you already have a SuperSign Manager installed on
your server. If not, this wizard may not setup network connections correctly.
● Only IPv4 is supported in the player and the server IP settings.
● If you entered the IP manually, and the network is disconnected, check the IP address and try again.
Note