Read completely, then follow step by step.
8
Indoor Unit
Installation
Installation
Selection of the best location
CAUTION : In case that the unit is installed near the sea, the installation parts
may be corroded by salt. The installation parts (and the unit) should be taken
appropriate anti-corrosion measures.
• Do not have any heat or steam near the unit.
• Select a place where there are no obstacles in front of the unit.
• Make sure that condensation drainage can be conveniently routed away.
Do not install near a doorway.
• Ensure that the space around the left and right of the unit is more than 50cm. The unit should be installed as high on the
wall as possible, allowing a minimum of 10cm from ceiling.
• Use a stud finder to locate studs to prevent unnecessary damage to the wall.
Unit : mm(inch)
more than 200
(7-7/8)
more than 500
(19-11/16)
more than 1500
(59-1/16)
more than 500
(19-11/16)
Signal receiver
Front Panel
Air Discharge
Air Filter
Features
