LG MS450H, Руководство пользователя

Страница: 22 / 60

Selecting a Region
Select a region where you operate this recorder.
1
Press HOME.
Use
b/B
to select the [Setup], and press OK.
Use
b/B
to select the [DTV] option.
4
Use
v/V
to select the [Region] and press OK.
5
Use
v/V
to select a region where you operate this
recorder, and press OK.
If the [Lock] option is set to [On], this function is not
available (page 23).
Scanning programmes automatically
All available digital TV or radio programmes are searched
and stored automatically based on the selected region.
1
Follow the steps 1-3 from “Selecting a Region” on
page 22.
Use
v/V
to select the [Auto Programming] and press
OK.
Use
v/V
to select the [Auto Scan] and press OK to
start the programme scanning.
l
Select [Cancel] and press OK to cancel.
l
This option is not available while recording or the
[Permanent Timeshift] option is the [Setup] menu is set
to [On].
l
If the [Lock] option is set to [On], this function is not
available (page 23).
Scanning programmes manually
Scans digital TV or radio programmes and adds the found
programmes to the programme list.
1
Follow the steps 1-3 from “Selecting a Region” on
page 22.
Use
v/V
to select the [Auto Programming] and press
OK.
Use
v/V
to select the [Manual Scan] and press OK to
display the [Manual Scan] menu.
l
Select [Cancel] and press OK to cancel.
4
Use
b/B
to select the desired multiplexer (MUX), and
press OK to start scanning.
OR
If you know the programme bandwidth and frequency,
use
b/B
to select the desired [Bandwidth], and Fill the
[Frequency] field using numerical buttons.
5
Press OK to start programme scanning.
l
This option is not available while recording or the
[Permanent Timeshift] option is the [Setup] menu is set
to [On].
l
If the [Lock] option is set to [On], this function is not
available (page 23).
Settings for Digital TV
To use DTV functions, this recorder needs some settings in advance. You can make settings and adjustments using the
[Setup wizard] menu. (refer to page 20 for details).
You can also set them manually as below.