19
Getting started
Turning your phone on and off
Turning your phone ON
1.
Install a battery to the handset and connect the
phone to an external power source such as the
travel adapter, cigarette lighter adapter or
hands-free car kit. Or install a charged battery pack
to the handset.
2.
Press and hold
for a few seconds until the LCD
screen is turned on.
3.
Depending on the status of the
PIN code request
setting you may need to enter your PIN code.
Turning your phone OFF
1.
Press and hold
for a few seconds until the LCD
screen is turned off.
Access codes
You can use the access codes described in this
section to avoid unauthorised use of your phone. The
access codes (except PUK and PUK2 codes) can be
changed by using the
Change codes
feature
[Menu 3-4-5]. See page 48.
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code
protects your SIM card against unauthorised use. The
PIN code is usually supplied with the SIM card. When
the
PIN code request
is set to
Enable
, your phone will
request the PIN code every time the phone is
switched on. When the
PIN code request
is set to
Disable
, your phone connects to the network directly
without the PIN code.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some SIM cards, is
required to access functions such as
Fixed dial num-
ber
. These functions are only available if supported by
your SIM card. Check with your network operator for
further information.