LG MFL62541004, Руководство по установке

Страница: 7 / 38

INSTALLATION PLACES
ENGLISH
7
Indoor unit
- The place shall easily bear a load exceeding
four times the indoor unit’s weight.
- The place shall be able to inspect the unit as
the figure.
- The place where the unit shall be leveled.
- The place shall allow easy water drainage.
- The place shall easily connect with the
outdoor unit.
- The place where the unit is not affected by
an electrical noise.
- The place where air circulation in the room
will be good .
- There should not be any heat source or
steam near the unit
* Suitable dimension “H” is necessary to get
a slope to drain as figure.
Outdoor unit
- If an awning is built over the unit to prevent
direct sunlight or rain exposure, make sure
that heat radiation from the condenser is not
restricted.
- Ensure that the spaces indicated by arrows
around front, back and side of the unit.
- Do not place animals and plants in the path
of the warm air.
- Take the air conditioner weight into account
and select a place where noise and vibration
are minimum.
- Select a place so that the warm air and noise
from the air conditioner do not disturb
neighbors.
H=200 or more
Top view
(unit: mm)
Front view
(unit: mm)
Front
Inspection hole
(600 x 600)
Control box
1000
More than
300
More than 700
More than 600
More than More than
300 300
Sunr
oof
Fence or
obstacles
OUTDOOR OU
TDO
OR
Unit Unit
OUTD
OO
R
Unit
More than
300
Unit : mm
INSTALLATION PLACES