L. C-MOTOR AND SHEATH HEATER
REMOVAL
1) Remove the air guide and the air duct.
2) Disconnect the leadwire from the circulation motor
and the sheath heater.
3) Remove four hex nuts securing the chamber guide
assembly to the oven cavity.
4) Remove a hex nut securing the circulation fan to
the shaft of the circulation motor.
5) Remove four screws securing the sheath heater
and the chamber.
6) Remove two hex nuts securing the circulation
motor to the chamber.
M. INTERLOCK SYSTEM
1) INTERLOCK MECHANISM
The door lock mechanism is a device which has
been specially designed to eliminate completely
microwave activity when the door is opened during
cooking and thus to prevent the danger resulting
from the microwave leakage.
2) MOUNTING OF THE PRIMARY/MONITOR/
SECONDARY SWITCHES TO THE LATCH
BOARD
3) INSTALLATION AND ADJUSTMENT OF THE
LATCH BOARD TO THE OVEN ASSEMBLY
• Mount the latch board to the oven assembly.
• Adjust the latch board in the arrow direction so that
oven door will not have any play in it when the door
is closed.
• Tighten the mounting screw.
5-6
ADJUSTMENT
DIRECTION
SECONDARY
INTERLOCK
SWITCH
INTERLOCK
MONITOR
SWITCH
PRIMARY
INTERLOCK
SWITCH
LGE Internal Use Only
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Содержание MC-3089NBC
Страница 31: ... 6 2 DOOR PARTS EV 13552A 13581A 14026A 15006A 14970A 13213A 13551A 13806A WTT033 WTP013 WWS016 13650A ...
Страница 34: ... 6 5 WSZ085 466001 43500A 466003 44510A 466001 43501A LATCH BOARD PARTS EV ...
Страница 36: ... 6 7 63302A 63303A 647781 WTT030 WSZ002 WTT028 WTT021 56170D BASE PLATE PARTS EV ...
Страница 37: ......