Operating
31
Oper
ating
4
Radio Operations
Be sure that both FM/AM aerials are connected.
(Refer to the page 16)
Listening to the radio
1. Press
RADIO&INPUT
until FM/AM appears in
the display window.
The last received station is tuned in.
2. Press and hold
TUNING (-/+)
for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
or
Press
TUNING (-/+)
repeatedly.
3. Adjust the volume by rotating
MASTER
VOLUME
on the front panel or by pressing
VOL
(+/-)
on the remote control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM/AM.
Before tuning, make sure that you have turned
down the volume.
1. Press
RADIO&INPUT
on the remote control or
RADIO
on the unit until FM or AM appears in
the display window.
2. Press or rotate to select a desired frequency;
- On the remote control:
TUNING (-/+)
- On the unit:
MULITI JOG DIAL
or
C
/
V
3. Press
ENTER
a preset number will flash in the
display window.
4. Press
PRESET (-/+)
to select the preset number
you want.
5. Press
ENTER
.
The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. Press to select a preset station;
- On the remote control:
PRESET -/+
or
0 to 9 numerical buttons
- On the unit:
PRESET - / PRESET
+
z
Deleting a saved station
1. Press
PRESET - / +
to Select a preset number
you want to delete.
2. Press
CLEAR
, the preset number will blink in the
display window.
3. Press
CLEAR
again, to delete the selected preset
number.
Deleting all the saved stations
1. Press and hold
CLEAR
for two seconds.
“ERASE ALL” will flash up on the unit display.
2. Press
CLEAR
to erase all saved of the radio
stations.
Improving poor FM reception
Press
PLAY (MONO/STEREO)
on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
MBT506-A0P_DIDNLLK_ENG_0727.indd 31
2011-11-30 �� 2:58:53