9
Select an input signal.
Press the SOURCE button on the remote control to select the input signal.
Or, press the SOURCE button at the front side of the product.
SOURCE
SET
When connecting with a DVI-D signal input cable.
• Select
DVI
: DVI-D digital signal.
When connecting with a D-Sub signal input cable.
• Select
RGB1
: 15-pin D-Sub analog signal.
• Select
RGB2
: 15-pin D-Sub analog signal.
•
How to connect to two computers.
Connect the signal cables (DVI and D-Sub) to each computer.
Press the SOURCE button in a remote control to select the computer to use.
•
Directly connect to a grounded power outlet on the wall or a power bar with a
ground wire.
Note
Turn on power by pressing the power button on the product.
Turn on the PC.
Power button
2
1
B1
A
SOURCE
SELECT
B2
C
Connecting to External Devices