![background image](http://html.mh-extra.com/html/lg/m1950d/m1950d_owners-manual_206222007.webp)
7
ENG
ENGLISH
ASSEMBLING AND PREPARING
When you adjust the angle, do not hold the
buttom of the Monitor set frame as shown on
the following illustration, as may injure your
fingers.
WARNING
Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
3
Remove 2 screws and pull out the
Stand Body
from the Monitor set.
2
Connect the
AC-DC Adapter
and
Power Cord
to a wall outlet.
Disconnect the power cord first, and then move
or install the Monitor set. Otherwise electric
shock may occur.
Tilt from +10 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.
CAUTION
NOTE
Front
Rear
10 cm
10 cm
10 cm
10 cm
10
- 5
Содержание M1950D
Страница 86: ...UK Only ...
Страница 87: ......