30
HCEC SETUP
ENGLISH
HCEC SETUP
Installation Menu (V 3.0)
LG Hotel Mode Setup
TV Manager
Password Change
Set ID Setup
Configuration Setup
Time Scheduler
Lock Mode
External Speaker
HCEC Setup
Insert Image
Welcome Video
OK
S/W : 00.02.00.01 Micom : 0.00.32
HCEC Setup
CEC Mode
IR Decoding
Device ID
StandBy
Forced Initialize
HTNG HotelMode
HCEC Setup
◄
Default
►
OK
Previous
No
All
All
No
No
y
Use the
button to select the HCEC Setup.
1
HCEC Setup
y
y
When ‘HCEC Setup’ is set to ‘HCEC Mode’, You can adjust ‘IR Decoding’, ‘Device ID’, ‘Stand By’ menu and
SIMPLINK feature automatically changed to the ON state, and the user can not change this status.
-
IR Decoding
y
y
When ‘IR Decoding’ is set to ‘Yes’, the TV decodes and changes it into a CEC Message and sends it to
Command via the HDMI CEC Line. The default value is No.
-
Device ID
y
y
Sets the ID of a device(Logical Address) connected to the CEC Line. You can choose
between ‘All’ and ‘E’.
y
y
The default value is ‘All’.
-
Stand By
y
y
Sets the sending and receiving scenario of the operation about [CEC Op standBy(0x0c)
Command(Device Power)].
y
y
The detailed scenario is described on the table below.
Send
Receive
Send Only
O
X
Receive Only
X
O
All
O
O
OFF
X
X
2
HTNG HotelMode
y
y
If the following options are selected because of the HTNG command:
*Power On Default, Start Volume, Maximum Volume, Minimum Volume, or Start Volume,
then the value for the HTNG HotelMode changes automatically to Yes and, even if the HotelMode is set to No,
the above options are still affected.
y
y
If you change it to No, then the values set by the HTNG will be canceled.
3
Forced Initialize
(* Only for LV5**H series)
y
y
If 'No' is selected, a command should be sent and received between the TV and a -device for proper
initialization.
y
y
If 'Yes' is selected, initialization is implemented when a device receives a command.
If initialization is not implemented, the TV remote control and local key will work.
Содержание LV30 G Series
Страница 52: ......
