LG LV30 G Series, Руководство по установке

Страница: 22 / 52

22 TV MANAGER
ENGLISH
1 Overview Diagnostics
1. It provides status information of the TV and information about the current input in XML file format. (There are
two kinds of information. There is information which is extracted regardless of the model, such as the model
name or boot version, and there is information which is available depending on the model, such as the micom
version, PTC version, etc.). The information created in the XML file can be checked in the TV's UI by pressing
88888888 in the TV's General menu.
2. If a SignalTrace standard level is set, it saves the average value of the channel signal with less than 30 tuning
counts to the digital broadcasting channel. If the count is more than 30, it saves good and bad signals by
comparing the average signal value to the current signal strength and signalTrace standard level (SignalTracer
Set) value.
► Bad signal: BML (average value) > strength (current signal strength) and (BML - strength) > SignalTracer
Set
► Good signal: BML< strength and (strength - BML) > SignalTracer Set
It provides the good and bad signals, average signal value, channel information, and date information etc. in
USB in XML file format. (Saved in changedSignal_report tag) Up to 127 reports for good and bad signals are
saved. If the reports number more than 127, they are written again beginning from 1.
2 Saving some status information of the TV set through USB in XML file format
y y
Create an LG_SVC folder on the USB on a PC.
y y
Create an empty file named tv_signal.rms in the LG_SVC folder.
y y
Insert the USB device into the TV.
y y
If the "Diagnostics is completed" message is displayed, remove the USB, open the tv_signal.rms file on a
PC and check the XML (model name, FirmwareVersion, bootVersion etc.) created within the file.
y y
The information created in the XML file can be checked in the TV's UI by pressing 88888888 in the TV's
General menu.
3 Saving signal status information of digital channels through SignalTrace in XML format
y y
Go to Installation menu -> TV Manager -> Diagnostics -> Diagnostics Setup
y y
Set the level value in Signal Tracer Set. (Disable, 10 to 90)
USB
OK Previous
Diagnostics
TV Manager
Diagnostics Setup
Signal Tracer Set
◄
Disable
►
Diagnostics Setup
OK Previous
y y
Change the channel and tune to a digital channel, then maintain the status for more than 5 seconds.
y y
Create an empty file named tv_signal.rms in the LG_SVC folder.
y y
Insert the USB device into the TV.
y y
If the "Diagnostics is completed" message is displayed, remove the USB, open the tv_signal.rms file on a
PC and check XML created in the file.
NOTE
y
If the user tunes to the same digital channel 30 times, the signal average is calculated. If the tuning count
to the same digital channel is more than 30, the good/bad signals, current signal, average signal, date and
channel information are saved in changedSignal_report XML tag.
y
The information created in SignalTrace is not displayed in the TV's UI.
y
In USB cloning, the configured Signal Tracer value is not cloned.
y
When a factory reset is performed, Signal Tracer Set is disabled and traced information is deleted.