REFRIGERATOR INSTALLATION
• Loosen and remove the 2 bolts and the
phillips head screw to remove the Middle
Hinge Bracket from refrigerator housing
(Fig. 21). Set parts aside.
• Using a ¼-inch socket wrench, loosen and remove
Hinge Pin from the Middle Hinge Pin Bracket.
Remove washer underneath the middle hinge and
set aside
Fig. 20
Fig. 20a
Fig. 20
Fig. 22
Fig. 20a
Fig. 22a
Fig. 21
• Using 10 mm or 13/32-inch socket wrench
with 2-inch extension, loosen the 3 bolts
and remove the Bottom Hinge from right
side of housing (Fig. 23).
Fig. 23
REVERSE AND REATTACH REFRIGERATOR
DOOR
•
REMOVE
base grill.
See
BASE GRILL INSTRUCTIONS
.
• Remove the washer from the Bottom Hinge Pin (Fig.22).
• Using a ¼-inch socket wrench, loosen and remove
the Hinge Pin from the Bottom Hinge. Reattach
the Hinge Pin to the opposite side of the Hinge
(see Fig. 22 and 22a).
NOTE:
This is easier to do while the Hinge is still
attached.
17
door slightly and remove it. (Fig. 20 and 20a).
NOTE:
At this point the door will be loose, lift up
