LG LT703, Руководство пользователя

Страница: 17 / 32

17
Connections
Data Port B
No Description Color
1 ALARM IN 5 Brown
2 ALARM IN 6 Blue
3 GND Yellow
4 TRX D - Green
5 TRX D + Red
6 GND Black
7 ALARM IN 7 Orange
8 ALARM IN 8 White
No Description Color
1 ALARM IN 5 Black
2 ALARM IN 6 Brown
3 GND Red
4 TRX D - Orange
5 TRX D + Yellow
6 GND Green
7 ALARM IN 7 Blue
8 ALARM IN 8 White
Alarm sensor 6
Alarm sensor 5
Alarm sensor 7
Alarm sensor 8
Alarm Input function
This speed dome camera has a terminal that can
sense the alarm signals.
If the alarm sensor that has installed in a door, win-
dow, safe etc. sense a touch or shock, the alarm
sensor send the alarm signal to the camera and the
camera will observe the sensed position.
There are “Manual mode” and “Auto mode” for the
Alarm Input function.
Manual mode: Change the observe position to a
sensor that senses a touch or shock then keep
observe the sensed position. (Set the Duration
Time of Alarm Input function to “0” using the
LKD1000 controller.)
•
•
<Example: If this unit receives signal from “Alarm 8”>
Alarm signal
input
Before inputting
the alarm signal
Function status Manual mode
While observe a
specific position.
Change the observe position
to the alarmed position then
keep observe the alarmed posi-
tion and you cannot control the
camera. If you want to control
the camera, you should set the
Duration Time of Alarm Input
function to "1 to 255" using the
LKD1000 controller.
While operating
Preset Tour func-
tion.
Stop preset touring and change
the observe position to the
alarmed position then keep
observe the alarmed position.
While operating
Auto Pan func-
tion.
Stop auto panning and change
the observe position to the
alarmed position then keep
observe the alarmed position.
While operating
Pattern function.
Stop operating pattern function
and change the observe posi-
tion to the alarmed position then
keep observe the alarmed posi-
tion.
Auto mode: Change the observe position to a
sensor that senses a touch or shock then return
to the position that previously observed. (Set the
Duration Time of Alarm Input function to “1 to
255”.)
•