LG LT1032BB Series, Руководство пользователя

Страница: 14 / 28

OPERATIONS
1 4
STARTING
When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperatures
prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.
BEFORE SETTING THE TEMPERATURE
●
The temperature of the refrigerator is kept constant regardless of changes in room temperature.
It is recommended that, once set, the temperature settings(the controls for the refrigerator and
freezer compartments) not be changed unless necessary.
●
This refrigerator has one temperature control button for the refrigerator compartment and one
temperature control dial for the freezer compartment.
●
The default setting of the temperature control button for the refrigerator compartment is ‘3°C’.
●
The default setting of the temperature control dial for the freezer compartment is ' '.
●
This refrigerator has a temperature sensor in the refrigerator compartment. It will start and stop
the compressor automatically as needed.
SELF TEST
●
Your refrigerator contains a built in diagnostic capability. If it develops a malfunction in certain areas,
it will display an error code to assist the repair technician. While an error code is displayed, other
control and display functions will not operate.
●
If an error code is displayed, contact a service center. Do not disconnect the power cord from
the outlet.
FOR INTERNAL CONTROLLER MODEL
cooling.(MIN = warmest, MAX = coldest temperature)
CONTROLS FOR REFRIGERATOR COMPARTMENT
The default setting of the temperature control button for
the refrigerator compartment is NORMAL.
To control the refrigerator temperature, press the REF.
TEMP CONTROL button.
Whenever pressing the button, LED emitting the light.
The temperature is set in 7 steps, from MIN to MAX.
REF. TEMP. CONTROL
Ref. Temp Control Button
3
DOOR ALARM
When the door of the refrigerator is open 1 minute, an alarm will sound three times. If the door remains
open, the alarm will repeat every 30 seconds.
(for external controller model),