LG LT1030HR, Руководство пользователя

Страница: 18 / 48

18 Room Air Conditioner
Operating Instructions
Operating Instructions
Controls
The controls will look like one of the following.
MODE TIMER POWER
FAN
SPEED
Fan
Heat
Energy
Saver
Cool
Timer
TEMP
' F
F1 LOW
F2 HIGH
REMOTE CONTROL SIGNAL
RECEIVER
POWER
MODE
- Push this button to shift mode of operation from COOL
→
ENERGY SAVER
→
FAN
→
HEAT
- COOL:
• Fan runs continually for normal cooling operation.
- ENERGY SAVER:
• The fan stops when the compressor stops cooling. Approximately every 3 minutes the fan will turn on and the unit will
check the room air temperature to determine if cooling is needed.
- FAN:
• Fan-only operation.
- HEAT:
• Fan runs continually for normal heating operation.
TIMER
- SHUT-OFF TIME
• You will usually use shut-off time while you sleep.
• If unit is running, use Timer to set number of hours until shut-off.
• For your sleeping comfort, once Time is set, the Temperature
setting will raise 2
°
F after 30 min., and once again after another
30 min.
• Push Timer button to advance setting from 1Hour
→
2Hours
→
...
→
12Hours maximum.
- START TIME
• If unit is off, use Timer to set number of hours before unit starts.
• Push Timer button to advance setting from 1Hour
→
2Hours
→
...
→
12Hours maximum.
TEMPERATURE SETTING
• Use this button to automatically control the
temperature of the room.
The temperature can be set within a range of
60
°
F to 86
°
F by increments of 1
°
F.
• The setting appears in the display.
• To turn the air conditioner ON, push this button.
To turn the air conditioner OFF, push the button
again.
• This button takes priority over any other button.
FAN SPEED
• Every time you push this button, it advances the setting as follows: {High[ F2 ]
→
Low[ F1 ]
→
High[ F2 ]}
AUTO RESTART
When power is restored after an electrical power failure, the unit will begin to run at its last setting.