5
Introduction
Remove water or dust from the power plug and insert it
with the ends of the pins securely connected.
Dust, water, a loose connection may cause a fire or electric
shock.
This grounding method is in violation of the NEC(National Electrical Code.)
Do not show this drawing or offer this advice because it will put us under great
liability.
When the power cord or the power plug is damaged or
the holes of the outlet are loosed, do not use them.
It may cause electric shock or short circuit to make fire.
Wait for 5 minutes or longer when reconnecting the plug.
Give the compressor time to cycle before re-starting.
If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
Pull out the power plug not by grasping the cord but the
plug of its end.
It may cause electric shock or short circuit to fire.
Do not pull out the cord or touch the power plug with wet
hands.
It may cause electric shock or injury.
