LG LS74SXS, Руководство пользователя

Страница: 42 / 178

42 MAINTENANCE
Application Guidelines/Water Supply
Parameters
Service Flow 0.5 gpm (1.9 lpm)
Water Supply
Community or Private Well -
Potable Water
Water Pressure 20 – 120 psi (138 – 827 kPa)
Water Temperature
33 °F – 100 °F (0.6 °C – 37.8
°C)
Capacity 200 gallons (757 liters)
It is essential that the manufacturer’s recommended
!
requirements be carried out for the product to perform
as advertised.
NOTE
x
While the testing was performed under standard
laboratory conditions, actual performance may vary.
Replacement Cartridge: ADQ74793501(LT1000P)
NSF System Trade Name Code: MDJ64844601
ˆ !
 
lg.com website.
For further assistance, the LG Electronics Customer
Information Center is open 24 hours a day/7 days a
week.
USA: 1-800-243-0000
Canada: 1-888-542-2623
LG is a trademark of LG corp.
NSF is a trademark of NSF International.
Manufactured for LG ® Electronics by:
LG Electronics, INC
170, Sungsanpaechoungro, Seongsan-gu,
Gyeongsangnam-do, THE REPUBLIC OF KOERA
WARNING
To reduce the risk associated with choking:
x
Do not allow children under 3 years of age to
have access to small parts during the installation
of this product.
To reduce the risk associated with the
ingestion of contaminants:
x
Do not use with water that is microbiologically
unsafe or of unknown quality without adequate
disinfection before or after the system. Systems
cysts. EPA Establishment # 070595-MEX-001
CAUTION
To reduce the risk associated with property
damage due to water leakage:
x
Read and follow Use Instructions before
installation and use of this system.
x
Installation and use MUST comply with all state
and local plumbing codes.
x
Do not install if water pressure exceeds 120 psi
(827 kPa). If your water pressure exceeds 80
psi, you must install a pressure limiting valve.
Contact a plumbing uncertain how to check your
water pressure.
x
Do not install where water hammer conditions
may occur. If water hammer conditions exist you
must install a water hammer arrester. Contact a
plumbing professional if you are uncertain how to
check for this condition.
x
Do not install on hot water supply lines. The
maximum operating water temperature of this
˜••žˆ`Ÿ_ž}†
x
< |
temperatures drop below 40 °F (4.4 °C).
x
% ƒ^„%
every 6 months, at the rated capacity or if a
"
x
< |!
when temperatures are expected to drop below
33° F.
x
Do not install systems in areas where ambient
temperatures may go above 110° F (43.3° C).
x
? &"
on a water system, a device for controlling
pressure due to thermal expansion must be
installed.
x
‰
of leaks.