19
Configuration setup
y
Image shown may differ from your TV .
- It is a mode to set whether to use Select RCU
or not . When ‘Select RCU’ is set to ‘Enable’, You can
adjust ‘Number of RCU’ menu .
(1) select rcu
- It is a mode to set Number of RCU .
Number of RCU value range 1~9 (When ‘Select RCU’ is set to ‘Enable’)
Number of RCU value range 0 (When ‘Select RCU’ is set to ‘Disable’)
(2) number of rcu
* RCU(Remote Control Unit) : It is special RCU that operates only setted number of RCU in TV .
- Sets the splash image display time .
- The time can be set to between 0 and 10 seconds .
(3) splash offset time
- When 'Auto Teletext' is set to 'Yes', you can use automatic teletext function .
- 'Auto Teletext' function can be operated in Australia country and Analog signal teletext only .
(4) auto teletext
Installation Menu (V2 .23)
LG Hotel Mode Setup
TV Link-Loader
Password Change
Set ID Setup
Configuration Setup
External Speaker
Pro:Centric
Power Saving
CEC Setup
Clock Setup
OK
S/W V 02 .05 .01 .01 / MCU V 02 .04 / FPGA V d . 279
configuration setup
Select RCU
Number of RCU
Splash Offset Time
Auto Teletext
RS232 DC Power Outlet
DTV Channel Update
On Timer Operation
Radio Name Display
Configuration Setup
0
0
Previous
OK
OFF
Auto
One
◄
Disable
►
No
No
