15
You can adjust tVlink-loader menu by only tVlink loader which is to be
purchased additionally.
- TV sets for each single hotel rooms, providing ‘TVLink-Loader’ does maximise installers conve-
nience . By copying all programme settings, picture setting, sound setting, option setting and instal-
lation menu setting . from a set as default and conveying into additional sets, which ensures unifor-
mity between sets and significantly reduces unnecessary installation time via RS232 .
In addition to this, TVLink-Loader enables to load programme for menu installation with wireless
basis .
Press the
MoDe
button until the display of TVLink Loader screen changes from “Ready” to “Mode in” .
• Be careful TVLink Loader doesn’t move and point the TVLink Loader towards the below center
on the set during this time .
Use the
up
/
Down
button to select the TVLink Loader .
Press the
MoDe
button in order to change from key to key and then press the
up
button .
Press the
senD
or
receIVe
button .
•
receIVe
:
RS232 is the main connection for receiving data .
•
senD
:
For transmitting reserved data can be done by wireless IR Signal or RS232 .
1 . Press SEND button to select "IR Send"(to send data through IR)or "RS Send"(to send data
through RS232)for the download mode .
2 . Press ENTER button to start transmitting .
The procedure of Loading will be projected on OSD .
1
2
3
4
5
TVLink-Loader
TV Link-Loader
Downloading . . .
43%
OK
TVLink-Loader
Receive from USB
OK
Send to USB
TVLink-Loader
(Refer to in p .17)
(Refer to in p .17)
1
2
y
Image shown may differ from your TV .
Previous
Previous
1
2
Installation Menu (V2 .23)
LG Hotel Mode Setup
TV Link-Loader
Password Change
Set ID Setup
Configuration Setup
External Speaker
Pro:Centric
Power Saving
CEC Setup
Clock Setup
tV link-loader
OK
S/W V 02 .05 .01 .01 / MCU V 02 .04 / FPGA V d . 279
