LG LS243HLV Скачать руководство пользователя страница 49

Страница: 49 / 57

REFRIGERANT DESIGN | 49

Refrigerant Piping Design & Layout Best Practices

Due to our policy of continuous product innovation, some specifications may change without notification.

INSTALLATION & LAYOUT BEST PRACTICES

Pipe Supports

A properly installed pipe system should be adequately supported to avoid pipe sagging.

Sagging pipes become oil traps that lead to equipment malfunction.

Pipe supports should never touch the pipe wall; supports shall be installed outside

(around) the primary pipe insulation jacket. Insulate the pipe first because pipe supports

shall be installed outside (around) the primary pipe insulation jacket. Clevis hangers

should be used with shields between the hangers and insulation. Field provided pipe

supports should be designed to meet local codes. If allowed by code, use fiber straps or

split-ring hangers suspended from the ceiling on all-thread rods (fiber straps or split ring

hangers can be used as long as they do not compress the pipe insulation). Place a sec-

ond layer of insulation over the pipe insulation jacket to prevent chafing and compression

of the primary insulation within the confines of the support pipe clamp.

A properly installed pipe system will have sufficient supports to avoid pipes from sagging

during the life of the system. As necessary, place supports closer for segments where

potential sagging could occur. Maximum spacing of pipe supports shall meet local codes.

If local codes do not specify pipe support spacing, pipe shall be supported:

•

Maximum of five feet (5′) on center for straight segments of pipe up to 3/4" outside

diameter size.

• Wherever the pipe changes direction, place a hanger within twelve (12) inches on one

side and within twelve to nineteen (12 to 19) inches of the bend on the other side as

shown.

Figure 15: Pipe Hanger Details.

Figure 16: Typical Pipe Support Location—

Change in Pipe Direction.

Figure 17: Pipe Support at Indoor Unit.

Max. 12"

~ 12" – 19"

A + B ~ 12" – 19"

Refrigerant Piping System Layout

Содержание LS243HLV


























































Результаты поиска

Содержание LS243HLV

Отзывы:

Похожие инструкции для LS243HLV

Бренды по названию

Популярные бренды

LG LS243HLV, Расширенное руководство по трубопроводной инженерии

Результаты поиска

Содержание LS243HLV

Отзывы:

Похожие инструкции для LS243HLV

Бренды по названию

Популярные бренды