LG LS-J0910CL Скачать руководство пользователя страница 22

Страница: 22 / 26

Room Air Conditioner

Maintenance and Service

Maintenance and Service

Indoor Unit

Before performing any maintenance, turn off the main power to the system.

Grille, Case, and Remote Control

❏

Turn the system off before cleaning. To clean, wipe
with a soft, dry cloth. Do not use bleach or
abrasives.

Supply power must be disconnected before cleaning
the indoor unit.

AIR FILTER

The air filters behind the front grille should be checked
and cleaned once every 2 weeks or more often if
neccessary.

❏

Never use any of the followings:

•

Water hotter than 40°C(104°F)
Could cause deformation and/or
discoloration.

•

Volatile substances
Could damage the surfaces of the air
conditioner.

1. Lift the front access panel and pull the filter tab

slightly forward to remove the filter.

2. Clean the filter with a vacuum or warm, soapy water.

• If dirt is conspicuous, wash with a solution of

detergent in lukewarm water.

• If hot water (40°C (104°F) or more) is used, it

may be deformed.

3. After washing with water, dry well in the shade.

4. Re-install the air filter.

NOTICE

Vertical louver Horizontal louver

Air filters

(behind front panel)

Air outlet vent

Air inlet vent

Gasoline

Powder

Содержание LS-J0910CL



























Результаты поиска

Содержание LS-J0910CL

Отзывы:

Похожие инструкции для LS-J0910CL

Бренды по названию

Популярные бренды

LG LS-J0910CL, Руководство пользователя

Результаты поиска

Содержание LS-J0910CL

Отзывы:

Похожие инструкции для LS-J0910CL

Бренды по названию

Популярные бренды