29
OPERATION
EN
G
LI
SH
• The displayed temperature is the target temperature, and not the actual temperature of the refrigerator.
The actual refrigerator temperature depends on the food inside the refrigerator.
e
Fresh Air Filter
The Fresh Air Filter helps remove odors from the refrigerator. The Fresh Air Filter has two settings, Auto
and Power. In
Auto
mode, the Fresh Air Filter cycles on and off in increments of ten minutes on and 110
minutes off. If set to the
Power
mode, the Fresh Air Filter stays on continuously for four hours, cycling
on and off in increments of ten minutes on and five minutes off. After four hours, the Fresh Air Filter
switches back to Auto mode.
• Press the
Fresh Air Filter
button repeatedly to toggle between
Power
mode and
Auto
mode.
NOTE
• Replace the air filter when the
g
icon turns on. After replacing the air filter, press and hold the
Fresh Air
Filter
button for three seconds to turn the icon light off. Replace the air filter approximately every six
months.
• Refer to the Replacing the Fresh Air Filter section for details.
f
Lock
The lock function disables every other button on the display.
• When power is initially connected to the refrigerator, the lock function is off.
• To lock the control panel buttons, press and hold the
Lock
button until the
k
icon appears in the
display and the function is activated.
• To disable the function, press and hold the
Lock
button for approximately three seconds.
g
Water Filter
Replace the water filter when the
h
icon turns on. After replacing the water filter, press and hold the
Water Filter
button for three seconds to turn the icon light off. Replace the water filter approximately
every six months.
h
Wi-Fi
The Wi-Fi button, when used with the
LG ThinQ
app, allows the refrigerator to connect to a home Wi-Fi
network. Refer to Smart Functions for information on the initial setup of the application.
The
f
icon shows the status of the refrigerator's network connection. The icon illuminates when the
refrigerator is connected to the Wi-Fi network.
Press and hold the
Wi-Fi
button for 3 seconds to connect to the network. The icon blinks while the
connection is being made, then turns on once the connection is successfully made.
i
Water & Ice Type
Select the desired dispenser mode from the buttons on the dispenser control panel. Press the
dispenser switch with a glass or other container to dispense cubed ice, water or crushed ice.
Changing the Craft Ice Mode
NOTE
• This feature is only available on some models.
• The
Freezer
button can also be used to set the
Craft Ice
mode to either
3 ICE
or
6 ICE
.
1
Touch any button on the control panel to activate it.
2
Press and hold the
Freezer
button for 3 seconds until the control panel beeps and the current ice
mode appears.
us_main.book.book Page 29 Thursday, January 7, 2021 5:38 PM