17
OPERATION
ENGLISH
OPERATION
Before Use
Clean the refrigerator.
Clean the refrigerator thoroughly and wipe off all dust that accumulated during shipping.
CAUTION
•
Do not scratch the refrigerator with a sharp object or use a detergent that contains
alcohol, a flammable liquid or an abrasive when removing any tape or adhesive from
the refrigerator. Remove adhesive residue by wiping it off with your thumb or dish
detergent.
•
Do not peel off the model or serial number label or the technical information on the
rear surface of the refrigerator.
Open refrigerator doors and drawers to ventilate the interior.
The inside of the refrigerator may smell like plastic at first. Remove any adhesive tape from
inside the refrigerator and open the refrigerator doors and drawers for ventilation.
Connect the power supply.
Check if the power supply is connected before use.
Wait for the refrigerator to cool.
Allow the refrigerator to run for at least two to three hours before putting food in it. Check
the flow of cold air in the compartments to ensure proper cooling.
CAUTION
•
Putting food in the refrigerator before it has cooled could cause the food to spoil, or a
bad odor to remain inside the refrigerator.
The refrigerator makes a loud noise after initial operation.
This is normal. The volume will decrease as the temperature decreases.
Содержание LRKNS1205V
Страница 100: ...50 MEMO ...
Страница 149: ...49 MEMO ...
Страница 150: ...50 MEMO ...
Страница 151: ...51 MEMO ...