LG LRG3061BD Скачать руководство пользователя

Страница: 2 / 74

This LG Service Manual, “ 30” Freestanding Self-Cleaning Gas Range,” provides the technician

with information on the operation and service of the Freestanding Self-Cleaning Gas Range. It

is to be used as a training Service Manual. For specific information on the model being

serviced, refer to the “Owner’s Manual” or “Tech Sheet” provided with the gas range.

SAFETY PRECAUTIONS

• Repairs of the appliance should be carried out by a licensed technician only. Incorrect repairs

may result in dangerous situations. If you need repairs, contact an LG Service Center or your

dealer.

• If the power cord is defective, it must be replaced by a qualified service agent with a UL listed

range cord.

• Electrical leads and cables should not be allowed to touch the oven.
• Rating plate is located on the left side of warming drawer.
• The power supply of the appliance should be turned off when it is being repaired.

FORWARD

LG Electronics assumes no responsibility for any repairs made

on our products by anyone other than Authorized Service Technicians.

WARNING

• DISCONNECT power supply cord from the outlet before servicing.

• Replace all panels and parts before operating.

• RECONNECT all grounding devices.

- Failure to do so can result in severe personal injury, death or electrical shock.

• DO NOT Touch when the oven operates.

- The interior parts will be very hot.

WARNING

If the information in this manual is not followed exactly, a fire or explosion

may result causing property damage, personal injury or death. If you smell

gas:

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your building.

• Immediately call your gas supplier from a neighbor’s phone. Follow the

gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire department.

Содержание LRG3061BD











































































Результаты поиска

Содержание LRG3061BD

Отзывы:

Похожие инструкции для LRG3061BD

Бренды по названию

Популярные бренды

LG LRG3061BD, Руководство по обслуживанию

Результаты поиска

Содержание LRG3061BD

Отзывы:

Похожие инструкции для LRG3061BD

Бренды по названию

Популярные бренды