LG LREL6321S Скачать руководство пользователя страница 12

Страница: 12 / 65

2-3

Only training and service purposes

To turn on a single surface unit

(Right Rear, Left Rear)

1. Push the Single element knob in.

2. Turn the knob in either direction to the desired

setting.

The control knob clicks when it is positioned at

both Off and Hi.

To turn on a dual surface unit

(Left Front, Right Front)

1. Push in the appropriate knob.

2. Turn the knob clockwise to use it as a Dual unit.

To set the warming zone control

1. Press the COOKTOP Set/Off button.

The warming zone indicator light flashes.

2. Use the Level buttons to adjust the temperature

settings. The temperature settings are

adjustable at all times.

3 To turn off the warming zone, press the Set/Off

button once.

Note:

• The warmer will not glow red like the other cooking

elements.

• The Warming Zone can be operated as a single element on

some models.

• The controls for the warming zone allow for 3

different heat settings : Lo~Hi

• “HS” will appear when the unit is hot to touch.

1. SETTING THE CLOCK

2. START, CLEAR/OFF AND ON/OFF PAD

1. Touch START key to start oven.

2. Touch CLEAR/OFF key to cancel a program

during cooking or Erase during programming.

USING YOUR RANGE

3. TO TURN ON/OFF THE OVEN LIGHT

The oven light automatically turns ON when the

door is opened.

1. The oven light may also be manually turned ON

or OFF by press the OVEN LIGHT key.

2. Knocking twice on the glass panel turns the

interior light on or off.

Note:

1. The oven light cannot be turned on if self-clean feature is

active.

2. The light turns off automatically after 90 seconds.

4. TIMER ON/OFF

To cancel timer at any time, touch TIMER ON/OFF key.

Note:

1. If you press TIMER ON/OFF key once, this allows you to

select "minutes"

(for example: if you press “5” and “6”, it means 56 minutes)

2. If you press TIMER ON/OFF key twice, this allows you to

select "seconds"

(for example: if you press “5” and “6”, it means 56 seconds)

5. OVEN TEMPERATURE ADJUSTMENT

The oven temperature can be adjusted from

-35°F (-19°C) to 35°F (19°C).

Note: The oven temperature adjustments made with this

feature will just change Bake, temperature.

1. Press

Settings

repeatedly until

AdJU

appears in the

display.

2. Use the number keys to enter the number of degrees

you want to adjust the oven temperature. Press

Settings

again to add a minus sign if decreasing the

temperature.

3. Press

Start

to accept the change.

CLEAR

/OFF

PRESS

CLOCK

Desired

Time

START

TIMER

ON/OFF

Desired

time

TIMER

ON/OFF

Содержание LREL6321S






























































Результаты поиска

Содержание LREL6321S

Отзывы:

Похожие инструкции для LREL6321S

Бренды по названию

Популярные бренды

LG LREL6321S, Руководство по обслуживанию

Результаты поиска

Содержание LREL6321S

Отзывы:

Похожие инструкции для LREL6321S

Бренды по названию

Популярные бренды