background image

82

-

B3. LED blinks five times, then repeats (Locked Piston: A & E Inverters)

Protection Logic

Protection Logic

Blink Blink Blink Blink Blink OFF

Protection

logic

Check B

Blink 5 times

(Lock Piston Trip) Check B3

Compressor

Doesn’t work

Repeat

Check Procedure 

Reset

Power

Compressor

Doesn’t work

N

Y

Replace

Compressor

Hi side

restriction

N

Y

Sealed
system

Repair

 

- Purpose: To detect locked piston
- Cause: Lack of oil to the cylinder, cylinder or piston damaged and or restricted discharge.

A Locked Piston can also be caused by foreign materials inside the compressor.

- Logic: Compressor is forced off and tries to restart within 2.5 minutes.

B4. LED blinks six times, then repeats (Current Trip: A & E-Inverters)

Blink

Blink

Blink Blink Blink Blink

OFF

Protection

logic

Check B

Blink 6 time

(Current Trip) Check B4

Compressor

Intermittently

works

Y

Capacitor

Spec.

Check C2

Compressor

Damage

Check C3

Replace

Capacitor

Replace

Compressor

NG

NG

Reset

Power

Y

Current trip

Occur?

Y

Repeat

Check Procedure

IPM

Check B5

Y

Replace

Driver PCB

NG

N

Y

N

Cycle

Check E

Y

Fix

Cycle

- Purpose: Prevent over-current (overload protect)
- Cause: Ambient temperature is high (over 43°C) and/or refrigerator’s condenser air movement is restricted.
- Condenser Fan is stopped, restricted discharge line, compressor is damaged, or IPM device is defective.
- Logic: Compressor is forced off and tries to restart after 6 minutes.

Содержание LMXS27626S












































































































Отзывы: