LG LM-2422A2L/A3L Скачать руководство пользователя страница 32

Страница: 32 / 81

- 32 -

Connecting
cable

Drain hose

Indoor unit tubing

Flare nut

Pipings

Spanner

Torque wrench

Plastic bands

Insulation material

Press the lower left and right side of the unit
against the Installation Plate until the hooks
engage with their slots (sound click).

6. Indoor unit installation.

• Hook the indoor unit onto the upper position of

the installation plate. (Engage the two hooks of
the rear top of the indoor unit with the upper
edge of the installation plate.)
Ensure the hooks are properly seated on the
installation plate by moving it in left and right.

7. Connecting the pipings to the indoor unit.

• Align the center of the pipings and sufficiently

tighten the flare nut with fingers.

• Finally, tighten the flare nut with torque wrench

until the wrench clicks.
Wrench tightening the flare nut with forque
wrench, ensure the direction for tightening fol-
lows the arrows on the wrench.

8. Wrap the insulation material around the con-

necting portion.

CAUTION: Take care to arrange the pipings,

drain hose and cables as the right
upper picture for inserting it into the
indoor unit and refixing the tubing
holder easily.

Pipe Size

Torque

Liquid Side (1/4")

1.8kg m

Liquid Side (3/8")

4.2kg m

Gas Side (1/2")

5.5kg m

Gas Side (5/8")

6.6kg m

Wrap the insulation material around the connecting
portion.

Содержание LM-2422A2L/A3L


















































































Результаты поиска

Содержание LM-2422A2L/A3L

Отзывы:

Похожие инструкции для LM-2422A2L/A3L

Бренды по названию

Популярные бренды

LG LM-2422A2L/A3L, Руководство по обслуживанию

Результаты поиска

Содержание LM-2422A2L/A3L

Отзывы:

Похожие инструкции для LM-2422A2L/A3L

Бренды по названию

Популярные бренды