background image

LG LK Series  Packaged Air Conditioners are
designed and manufactured to meet the
requirements of the Gulfs severe climatic con-
ditions and are built specifically for outdoor
installations, either on ground or roof level.
The LK Series Packaged Air Conditioners are
ideal for warehouses, large halls, schools,
mosques, or wherever the requirement is for
a heavy duty unit with a Scroll compressor.
Units are designed to operate in a wide ambi-
ent temperature rang from 21 °C to 52 °C. 
LK Series Packaged Air Conditioners are com-
pletely assembled, internally wired, charged
with R-22 refrigerant at factory, tested before
dispatch and ready for installation. All that is
required on site is fixing filters and connecting
ducting and power supply. Units are designed
for ducted systems which will enable them to
be installed on roof tops or on the ground. 

Points to remembered

Being an electromechanical machine, the unit

may fall or cause difficulties. Remembering

the following few points will ensure correct

and prompt rectification and continued optimal

performance:

- A correct installation ensuring proper clear-

ances for correct condenser air flow and

maintenance as per the drawings shown for

recommended clearance

- Proper level base on foundation with appro-

priate vibration mount. All connections and

hook up to be followed as per instructions,

which ensures long term trouble free opera-

tion and performance.

- If power fuse is blown off, be sure to replace

the same with a new fuse having pre

designed Amperage. Do not use a steel wire

or copper wire instead of proper fuse.

Genuine fuse ensures safety and proper pro-

tection. Incorrect fusing may cause fire or

trouble with your equipment. Before  replac-

ing  any  fuse  or  opening  any  electrical

panel door, make sure the main switch is

OFF

- Do not spray or sprinkle water directly over

or into the air conditioning equipment for

cleaning because electric insulations and ter-

minal of the components are opened

- This Air conditioning equipment is meant to

be installed out doors and suitable to normal

environment elements. Do  not try to cover

or block any inlets or discharge openings to

condenser

- Periodical maintenance of the unit  will  give

better performance  in the  long  run  than

only  break  down maintenance.

NOTE

!

LG reserves the right to change, in part
or in whole the specifications of its Air
Conditioning Equipment at any time in
order to add the latest technology.
Therefore, the enclosed information may
change without any prior notice.

UNIT DESCRIPTION

8

UNIT DESCRIPTION:

ENGLISH

Содержание LK-C0608A


















Отзывы: