manualshive.com logo in svg

LG LGES-5048, Руководство пользователя

Поделиться
Скачать
LG LGES-5048 Скачать руководство пользователя страница 31

28

Other Questions

Q: Is there a quick way to make the system work?
A: For the shortest resolution, please refer to "LGES Quick Installation Instructions" and to the "LGES 
PV Master App Instructions".

Q: What kind of load can I use to connect to the backup side?
A: Please refer to User Manual on page 14.

Q: Will the warranty of the inverter still be valid if, for some special conditions, we cannot follow 
100% of the User Manual instructions for installation or operation? 
A: Normally we still provide technical support for problems caused by not following the instructions 
in the User Manual. However we cannot guarantee any replacements or returns. So, if there are any 
special conditions for which you cannot follow the instructions 100%, please contact the Technical 
Support department for suggestions.

4.3 Disclaimer

The inverters are transported, used and operated under environmental and electrical conditions. The 
manufacturer has the right to not provide technical support services or assistance under the following 
conditions:
• Inverter is damaged during transfer.
• Inverter is out of warranty year and extended warranty is not bought.
• Inverter is installed, refitted or operated in improper ways without authority from manufacturer.
• Inverter is installed or used under improper environment or technical condition mentioned in this
user manual, without authority from manufacturer.
• Installation or configuration of the inverter does not follow requirements mentioned in this user
manual.
• The inverter is installed or operated against the requirements or warnings that are mentioned in this
user manual.
• Inverter is broken or damaged by any force majeure like lightning, earthquake, fire hazard, storm and
volcanic eruption etc.
• Inverter is disassembled, changed or updated on software or hardware without authority from
manufacturer.
• Inverter is installed, used or operated against any related items in international or local policies or
regulations.
• Any non-compatible batteries, loads or other devices connected to inverter.

Note: The manufacturer retains the right to explain all of the contents in this User Manual. To ensure 
IP65, the inverter must be sealed well; please install the inverters within one day of unpacking; otherwise, 
please seal all unused terminals /holes; unused terminals/holes are not allowed to remain open; and 
confirm that there is no risk of water or dust entering any terminals/holes.

Содержание LGES-5048






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды