LG LFX23961SB /01 Скачать руководство пользователя

Страница: 7 / 50

1.Removing Refrigerator Handle

•

Loosen the set screws with the 3/32” Allen
wrench and remove the handle.

NOTE:

If the handle mounting fasteners

need to be tightened or removed, use a 1/4”

Allen wrench.

2.Removing Freezer Drawer Handle

•

Loosen the set screws located on the lower
side of the handle with the 3/32” Allen
wrench and remove the handle.

NOTE:

If the handle mounting fasteners

need to be tightened or removed, use a 1/4”
Allen wrench.

Mounting

Fasteners

Allen Wrench

Set Screw

3-2 REMOVING REFRIGERATOR HANDLE

3-3 REMOVING FREEZER HANDLE

3-4 DOOR GASKET REMOVAL

1. Remove door frame cover

Starting at top of cover and working down, snap cover
out and away from door.

2. Remove gasket bracket clips

There are two clips on each door. Start bracket removal
near one of the middle clips.
1) Pull gasket back to expose gasket bracket clip and

door frame.

2) Insert a flat tip screwdriver into seam between gasket

bracket and door frame and pry back until clips snap
out.

3) Continue prying back along seam until all clips snap

out.

3. Remove gasket

Pull gasket free from gasket channel on the three

Frame Cover

Handle

Door

Frame

Gasket

Bracket Clip

Flat Tip

Screwdriver

Gasket

Bracket

remaining sides of door.

- 7 -

Содержание LFX23961SB /01



















































Результаты поиска

Содержание LFX23961SB /01

Отзывы:

Похожие инструкции для LFX23961SB /01

Бренды по названию

Популярные бренды

LG LFX23961SB /01, Руководство по обслуживанию

Результаты поиска

Содержание LFX23961SB /01

Отзывы:

Похожие инструкции для LFX23961SB /01

Бренды по названию

Популярные бренды