- 10 -
3-9 LAMP
3-9-1 Refrigerator Compartment Lamp
1. Unplug Refrigerator, or disconnect power at the circuit
breaker.
2. If necessary, remove top shelf or shelves.
3. Using a flat instrument, gently pry the cover loose in the
front as shown. Rotate downward to remove rear tabs.4.
Make sure the bulbs are cool to the touch.
Turn bulbs counterclockwise to remove.
5. Assemble in reverse order by snapping the Lamp Cover
in, engaging the rear tabs followed by the front tabs.
(Max. 40 W-2EA)
3-9-2 Freezer Compartment Lamp
1. Unplug refrigerator power cord form outlet.
2. Gently pry the lamp cover loose in the back
as shown. Rotate forward to remove the
front tabs.
3. Make sure the bulb is cool to the touch. Turn the
bulb counterclockwise to remove.
4. Replace with a new 40-watt appliance bulb.
5. Insert tabs on front of cover into slots in freezer
ceiling. Push cover up to snap back into place.
1. Remove the upper and
lower Caps by using a flat
screwdriver, and remove
2 screws.
2. Disconnect the lead wire
1) Loosen the 3 screws on the PWB cover.
2) Remove the PWB cover
3) Disconnect wire harness and replace the main PWB in
1) Pull out the darin 2) Grasp the lower
part of the dispenser
firmly ,pull it out.
3) Hold the inner side
of cover dispenser
with both hands at the
handle side to pull it
out forward.
3-11 MAIN PWB
3-10 MULTI DUCT
on the bottom position.
