19
INSTALLATION
ENGLISH
Electrical connections
Electrical requirements
220-240 V CA and 50/60 Hz properly grounded
dedicated circuit protected by a 15 A circuit breaker or
slow blow fuse. If an external electric source is used,
when installing the appliance a properly grounded
connection must exist to comply with the local codes
or, if no such codes exists, then according to the
National Electrical Code.
Grounding
IMPORTANT: FOR PERSONAL SAFETY, THIS
APPLIANCE MUST BE PROPERLY GROUNDED.
The customer should have the wall receptacle and
circuit checked by a qualified electrician to make sure
the receptacle is properly grounded.
CAUTION
THE CUSTOMER SHOULD HAVE
THE CIRCUIT CHECkED BY A
QUALIFIED ELECTRICIAN TO
MAkE SURE THE RECEPTACLE
IS PROPERLY GROUNDED.
Do not use the adapter plug because disconnecting
of the power cord causes unnecessary strain on the
adapter and leads to eventual failure of the adapter
ground terminal.
Another grounding method
Copper grounding plate (copper wire)
Connect grounding cable to a copper ground plate
and bury plate 75 cm (30”) below the ground.
Grounding
cable
Copper ground plate
30 inches
Short circuit breaker
If the installation is made in an area where grounding
is not possible, get a proper measure short circuit
breaker and connect it to the electrical outlet
Short circuit
breaker
CAUTION
•
NEVER GROUND APPLIANCE
THROUGH A GAS PIPE, MAY
RESULT IN AN EXPLOSION
HAZARD.
•
DO NOT GROUND APPLIANCE
THROUGH TELEPHONE
WIRES OR LIGHTNING RODS;
IS DANGEROUS WHEN
ELECTRICAL STORMS HAPPEN.
•
DO NOT GROUND APPLIANCE
THROUGH WATER PLASTIC
PIPES.
•
GROUNDING CONDUCTORS
MUST BE CONNECTED WHEN
USING AN EXTENSION CORD.
Содержание LF761S
Страница 45: ...44 ةركذم مذكرة ...
Страница 46: ...43 ةركذم عربي مذكرة ...