LG LF-D5933, Руководство пользователя

Страница: 26 / 40

Presetting the radio stations
You can preset 50 stations for FM and AM.
Before tuning, make sure that you have turned the vol-
ume down to the minimum level.
11
Press TUNER/BAND to show either FM or AM in
the display window.
Every time you press this button, AM and FM
changes alternately.
2 2
Turn the MULTI JOG DIAL on the front panel until
the frequency indication starts to change.
otes
Automatic Tuning
Press the AUTO TUNING (
▼
/
▲
) buttons.
- Scanning stops when the unit tunes in a station.
Manual Tuning
Use the MULTI JOG DIAL.
3 3
Press MEMORY on the front panel.
A preset number will flash in the display window.
4 4
Press PRESET
D D
/
E E
(or PRESET
/
on the
remote control) to select the preset number you
want.
5 5
Press MEMORY again.
The station is stored.
6 6
Repeat steps 2 to 5 to store other stations.
To clear all memorized stations
Press and hold MEMORY on the front panel for about
two seconds, “ CLEAR ” appears in the display window
and then press CLEAR on the front panel, the stations
are cleared.
For your reference
If all stations have already been entered, “ FULL ”
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow the steps 4-5 .
To recall preset numbers
Press and hold PRESET
D
/
E
(or PRESET
/
on
the remote control) until the desired preset number
appears or press the button repeatedly.
Listening to the radio
11
Press TUNER/BAND to select either AM or FM in
the display window.
The last received station is tuned in.
2 2
Press PRESET
D D
/
E E
(or PRESET
/
on the
remote control) repeatedly to select the
preset station you want.
Each time you press this button, the unit tunes in
the next preset station.
3 3
Adjust the volume by rotating VOLUME knob
(or pressing VOLUME -/+ on the remote control)
repeatedly.
To listen to non-preset radio stations
• For manual tuning, see “Manual Tuning”.
• For automatic tuning, see “Automatic Tuning”.
To turn the radio off
Press POWER to turn off the unit or select another
function mode (TAPE, DVD/CD or AUX).
For your reference
• If a FM program is noisy
Press MODE/RIF repeatedly so that “ ”
disappears in the display window. There will be no
stereo effect, but the reception will improve. Press
MODE/RIF again to restore the stereo effect.
• To improve reception
Reposition the supplied antennas.
otes
Use MODE/RIF (Radio Interference Filter) function
to switch to Mono reception if stereo reception is
distorted by noise.
While recording weak AM broadcasts, if noises
occurs, press MODE/RIF once.
26
Operation with RADIO