background image

TEMPERATURE IS TOO WARM OR THERE IS INTERIOR MOISTURE BUILDUP

The air vents are blocked. Cold air circulates

Locate air vents by using your hand to sense airflow and

from the freezer to the fresh food section and

move all packages that block vents and restrict airflow. Refer 

back again through air vents in the wall dividing

to 

multi flow

Section for the location of 

the two sections.

air vents.

The doors are opened often.

When the door is opened, warm humid air is allowed into

the refrigerator. The more the door is opened, the faster the 
humidity builds up, and the more warm air the refrigerator 
must cool. In order to keep the refrigerator cool, try to get 
everything you need out of the refrigerator at once, keep 
food organized so it is easy to find and close the door as 
soon as the food is removed.

The control is not set correctly for the surrounding 

Refer to the 

Setting the Controls

Section.

conditions.

Wait 24 hours for temperatures to stabilize or even out. If the 
temperature is too cold or too warm, move the dial one 
number at a time.

A large amount of food has just been added

Adding food warms the refrigerator. It can take a few hours

to the refrigerator or freezer.

for the refrigerator to return to normal temperature.

The food is not packaged correctly.

Wrap food tightly and wipe off damp containers prior to 

storing in the refrigerator to avoid moisture accumulation. If 
necessary, repackage food according to the guidelines in the 

Food Storage Guide

Section.

T

.

he doors are not closing completely.

See 

Doors will not close completely

The weather is humid.

In humid weather, air carries moisture into refrigerator
when doors are opened.

A self-defrost cycle was completed.

It is normal for droplets to form on the back wall after the 
refrigerator self-defrosts.

TROUBLESHOOTING GUIDE

36

AUTOMATIC ICEMAKER DOES NOT WORK

Icemaker power switch in the 

O (off)

position.

Move the switch to the 

I (on)

position.

Water supply turned off or not connected.

See the 

Connecting the Water Line

section.

Freezer compartment too warm.

Wait 24 hours for the freezer to reach its ideal temperature.

Piled up cubes in the storage bin cause the icemaker 

Level cubes by hand.

to shut off.

Check if...

Then...

Check if...

Then...

Содержание LDN22735







































Отзывы: