LG LDE3011ST Скачать руководство пользователя страница 6

6

PREPARE TO INSTALL THE RANGE

SAVE FOR THE USE OF THE LOCAL ELECTRICAL 
INSPECTOR.

 NOTE

CLEARANCES AND DIMENSIONS (Figure 1)

To install range refer to the following Figure 1.

For installation in CANADA, a Free-standing range is 
not to be installed closer than 

15

/

32

 (12mm) from any 

adjacent surface.

INSTALLATION DRAWINGS (LDE Series only)

•   You should make sure that the wall covering, 

countertop and cabinets around the range can 

withstand the heat (up to 194°F) generated by 

the range.

-   Discoloration, delamination or melting may 

occur.

-   This range has been designed to comply 

with the maximum allowable wood cabinet 
temperatures of 194°F.

 CAUTION

•   Cabinet storage space located above the 

surface units should be avoided.

•   You should install a range hood that projects 

horizontally a minimum of 5 inches beyond 

the bottom of the cabinets.

If cabinet Storage is to be provided.

-   The risk of burns or fire by reaching over the 

heated surface elements can be reduced.

 CAUTION

2.5”

(6.3cm)

6”

(15.2cm)

9”

(23cm)

9”

(23cm)

11”(28cm)

15”(38cm)

4”

(10cm)

4”

(10cm)

5”

(13cm)

Wall

Center

Cabinet

Cabinet

opening

2.5”(6.3cm)

2.5”(6.3cm)

6”

(15.2cm)

6”

(15.2cm)

MINIMUM DIMENSIONS (Figure 2)

  *  30”(76.2 cm) minimum clearance between the top of the cooking surface and the bottom of an unprotected wood 

or metal cabinet; or 24”(60.9 cm) minimum when bottom of wood or metal cabinet is protected by not less than 

1

/

4

”(6.4 cm) flame retardant millboard covered with not less than no. 28 MSG sheet steel, 0.015”(0.381 mm) stainless 

steel, 0.024”(0.610 mm) aluminum or 0.020”(0.508 mm) copper.

**  15”(38.1 cm) minimum between countertop and adjacent cabinet bottom.

FIGURE 1

FIGURE 2

A  = 30”(76.2 cm) For U.S.A 

= 30”(76.2 cm) ~ 31”(78.7 cm) For CANADA

•   You should use two or more people to move and 

install range. (Excessive Weight Hazard)

-  Failure to do so can result in back or other injury.

•   You never pull or push any handles of upper & 

lower door to move and install range.

-   Failure to do so can result in serious damage to 

the door of the range.

 WARNING

Содержание LDE3011ST












Отзывы: