background image

3

ENGLISH

SAFETY

BEFORE YOU BEGIN

Remove all tape and packing materials before using the range.

Dispose of all plastic bags after unpacking the range. Never allow children to play with packing materials.

You can download the installation and owner’s manual at: http://www.lg.com.

IMPORTANT SAFETY INSTRUCTIONS

Read and follow all instructions before using your oven to prevent the risk of fire, electric shock, personal injury, or 
damage when using the range. This guide does not cover all possible conditions that may occur. For further assistance 
contact your service agent or manufacturer.

This is the safety alert symbol. This symbol alerts you to potential hazards that can cause personal injury to 
you and others. All safety messages will follow the safety alert symbol with either the word “WARNING” or 
“CAUTION”.

 WARNING

This symbol will alert you to hazards or unsafe practices which could cause serious bodily harm or death.

 CAUTION

This symbol will alert you to hazards or unsafe practices which could cause bodily injury or property damage.

•  The information in this manual should be followed exactly.

-  A fire or electrical shock may result causing property damage, personal injury or death.

•   Any person should not step or sit on the oven door. You should install the Anti-Tip Bracket supplied with 

the range.

-  The range could be tipped and injury might result from spilled hot liquid, food, or the range itself.
-    If the range is pulled away from the wall for cleaning, service, or any other reason, ensure that the Anti-Tip 

Device is properly reengaged when the range is pushed back against the wall.

-  Install the Anti-Tip Bracket. Screws must be fixed to at least two locations.
-  A child or adult can tip the range and be killed.
-  Failure to do so can result in death or serious burns to children or adults.
-  1) According to the Anti-Tip Bracket Template, install Anti-Tip Bracket to the floor and wall.
-   Anti-Tip will fasten the range by holding the range’s leg from the rear side and the Anti-Tip Bracket Template 

lets you know the location of Anti-Tip Bracket easily.

-  2) Engage the range to the Anti-Tip Bracket by putting the range’s legs into each Anti-Tip Bracket.
-  3) Re-engage the Anti-Tip Bracket if you can move the range without oven’s front direction.
-  4) See installation instructions for details (refer to the page 11).

•  You should use two or more people to move and install range. (Excessive Weight Hazard)

-  Failure to do so can result in back or other injury.

•  You never pull or push any handles of upper& lower door to move and install range.

-  Failure to do so can result in serious damage to the door of the range.

•   New branch-circuit installations (1996 NEC) for mobile homes, recreational vehicles, and installations 

where local codes do not allow grounding through the neutral wire require a 4-conductor UL listed range 
cord or 4 wire conduit connection.

•   Power supply cord and plug should not be modified. If it will not fit the outlet, have a proper outlet 

Installed by a qualified electrician.

 WARNING

Содержание LDE3011ST












Отзывы: