background image

5

ENGLISH

SAFETY

•   The information in this manual should be 

followed exactly.

-   A fire or electrical shock may result causing 

property damage, personal injury or death.

 WARNING

Tip - Over Hazard

A child or adult can tip the range and be 
killed. Verify the anti-tip bracket have been 
installed. Ensure the anti-tip bracket is 
enganged when the range is moved.
Do not operate the range without the anti-
tip bracket in place. Failure to follow these 
instructions can result in death or serious 
burns to children and adults.

 

WARNING

bracket

Leveling
leg

bracket

Leveling
leg

To check visually that leveling leg is inserted 
into bracket, grasp the top rear edge of the 
range and carefully attempt to tilt it forward.

•   You should put on gloves during the installation 

procedure.

-   Failure to do so can result in bodily injury.

 CAUTION

•   Read all instructions contained in these installation 

instructions before installing range.

•   Remove  all  packing  materials  from  the  oven 

compartments before connecting the electrical 
supply to the range.

•   Observe all governing codes and ordinances.
•   Be  sure  to  leave  these  instructions  with  the 

consumer.

 NOTE

Keep these instructions with your owner’s manual 
for future reference.

•   As when using any appliance generating heat, there 

are certain safety precautions you should follow.

•   Be sure your range is installed and grounded 

properly by a qualified installer or service technician.

•   Make sure the wall coverings around the range can 

withstand the heat generated by the range.

•   To eliminate the need to reach over the surface 

elements, cabinet storage space above the elements 
should be avoided.

 NOTE

PREPARE TO INSTALL THE RANGE

TOOLS NEEDED

Phillips Screwdriver

Pliers

Tape Measure

Pencil

1

/

4

” Nut Driver

Flat-blade 

Screwdriver

Level

Adjustable Wrench

Safety Glasses

Gloves

Drill

PARTS PROVIDED

Template (1)

(For Anti-Tip Bracket Mounted 

on Concrete Floors and Walls)

Anchor Sleeves (6)

Anti-Tip Bracket Kit (1)

Lag Bolts (6)

PARTS NOT PROVIDED

(UL Approved 40 or 50 AMP)

4-Wire Cord 

OR

 3-Wire Cord

Strain Relief

(For Conduit 

Installations Only)

Содержание LDE3011ST












Отзывы: