LG LCC-K1000 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 24

LG LCC-K1000 Скачать руководство пользователя страница 22

22

Camera Control
Function

Camera control functions are operable.
It is necessary to set up the camera before using the
camera control functions. For further information,
refer to the Operating Instructions for the respective
combination camera. You can also set it up from the
Camera Setup menu during operating the system.

Pan/Tilt Control

A combination camera or an ordinary camera with
pan/tilt head can be controlled.

Move the pan/tilt head in the desired direction using
the joystick.

Lens Control

The following functions are available with cameras
provided with controllable lens.

1. Press the In button to optically bring the object

closer, or press the Out button to optically widen
the scene.

Tip:

Turning the joystick head to the right or left

will zoom or widen the image. (The zooming level
will go up or down.)

Note:

Focal length differs depending on the lens

installed on the camera.

2. Press the Near or Far button to adjust the lens

focus while watching the monitor.

3. Press the Open or Close button to adjust the lens

iris while watching the monitor.

1

2

3

1

LCC-K1000_AABBLLG_ENG 8/9/05 2:55 PM Page 22

«
...
20
21
22
23
24
»

Содержание LCC-K1000

























Отзывы:

Нет отзывов