manualshive.com logo in svg

LG LCC-K1000, Руководство пользователя, Страница: 19 / 24

Поделиться
Скачать
LG LCC-K1000 Скачать руководство пользователя страница 19

19

Privacy Setup

This setting is used for masking unwanted zones,
hiding them from display on the monitor screen. 
Up to 8 zones can be registered. Submenus are pro-
vided for zone number selection and parameter set-
ting.

To register a new privacy zone

1. Press the Set Up button then select the [PRIVACY

ZONE] icon.

2. Press SEL.

The sub menu will appear for [PRIVACY ZONE]
setting.

3. Select [Set Zone Area] option then press SEL.

The sub menu will appear.

4. Press the PTZ1 or PTZ2 button then use number

buttons to select a camera’s number, if required.

5. Press SEL.

6. Use number buttons to select the zone index num-

ber then press SEL to confirm. 
The zone frame appears on the monitor.

7. Adjust the pan, tilt, and zoom position so that the

desired position comes into the zone frame with
the joystick.

8. Press SEL.

The privacy zone setting has been completed and
the setting is memorized in the camera’s memory.

9. Repeat steps 3-8 to add additional position.

To display or disappear privacy zone

1. Press the Set Up button then select the [PRIVACY

ZONE] icon.

2. Press SEL.

The sub menu will appear for [PRIVACY ZONE]
setting.

3. Select [Display Zone Area] option then press SEL.

The sub menu will appear.

4. Use 4 (ON) or 6 (OFF) buttons to select Alarm

Input Mode then press SEL.
ON: Preset privacy zones are veiled on the moni-
tor screen.
OFF: The veiling function does not work.

5. Enter a [Zone Index] number (1-8).

The display zone setting has been completed and
the setting is memorized to the camera’s memory.

6. Repeat steps 4-5 to set additional zone.

PRIVACY ZONE

000

PTZ

[

vV

:

bB

]

[Num]

Set Zone Area
Display Zone Area

[Set Privacy Zone]
Zone Index :  ---
  (1 ~ 8)

PTZ

000

PTZ

000

PRIVACY ZONE

000

PTZ

[

vV

:

bB

]

Set Zone Area
Display Zone Area

PTZ

000

Display

: OFF

Zone Index

: - - -

   (1~8)
<4:OFF , 6:ON>           [Num]

PTZ

000

LCC-K1000_AABBLLG_ENG  8/9/05  2:55 PM  Page 19

Содержание LCC-K1000

























Отзывы:

Нет отзывов